Getting down and dirty in Coomera

We woke up in Southport rocking to the wakes of frenetic Aussies determined to have a good time at seven on a Saturday morning, sounding for all the world like a plague of giant mozzies screaming around on their colorful but annoying jet skis. We decided to head up the Coomera River to the famous Boat Works Marina which we’ve been hearing about since we arrived in Oz. We’d been warned that it’s particularly crowded and without a reservation it might be tough but we’ve always believed in special dispensation for spunky fools, so we upped anchor and ran right into a healthy two plus knot current. Without the services of the “Evil Twin” (the starboard diesel) this may take a little longer than anticipated.

We eventually wiggled our anchor into an unoccupied spot just off Boat Works and slowly it dawned on us that they are closed for the weekend. Marce busied herself ordering a replacement clothes washer that she’s spent months researching. We are not fooling around here, and they deliver! The watery details of the delivery we’ll leave to personal charm, charisma and a positive attitude, or just refer to the spunky fools paragraph.

We dinghied over to the dock determined to hit the ground running, and immediately ran into friends from Sea Wolf whose advice on a good diesel mechanic is to talk to someone named Craig who Grant says is the only one he trusts with his engines. Fortunate because this is a vast complex with multiples of each trade and getting a personal recommendation is golden.

By Tuesday the women in the office, after a lot of boat jockeying, found dock space for Escape Velocity at, let’s just call it slip 9 3/4. It’s not an actual slip, just a walkway, and there’s no access to water and no electricity, just 3 cleats we can tie up to. I’d be embarrassed to tell you what those three cleats cost per week but that’s cruising. In the meantime plan A with the washer worked when a small but wiry guy showed up at the marina and we lugged the thing down the ramp, down the dock, and up onto the deck of EV. This has been a long time coming.

Later I charmed a soon to be ex-friend, using beer, into carefully manhandling the washer down four steps, through three doorways with doors removed, twisting, turning, tilting, straining everything, but we did it. I didn’t mention that the complicating factor with replacing the washer was that our boat is wired for North American electricity, 120v, and we are in the 240v part of the world. Our new 240v washer required me to install a 240v inverter. This is a pretty common solution among the North American boats we meet on this side of the globe. I think this means we are now truly international.

We’ve spent serious “boat units” on our starboard Volvo over the last year. (1BU = $1k) The mechanics we hired did everything but fix the problem, persistent smoking and running hotter than the port engine. I’ve been managing this thing since day one and we’ve decided that we will leave here with a permanent solution. Our new best friend Craig said he’s got the right guy who can start on the Evil Twin the next day. You can see how this works…this “spunky fools” thing. I admit now that I have great foreboding about where this Evil Twin fix is going.

Ok, the new guy is very young but he soon gains cachet with me by finding smoke coming out of the small coolant overflow tube. There aren’t many ways for that to happen, none of them cheap. Within a half hour we were looking at a shocking crack in the cylinder head. Well at least it’s just the head and not the whole engine. Volvo being Volvo, a new head shipped from Sweden costs double what a new Chevy V8 costs and will require us to cool our heels for weeks waiting for it to arrive. Turns out it’ll be cheaper and faster to buy a whole used D1-30 Volvo and my new best friend “J-Rod the kid mechanic” found two right here in Boat Works, with working alternators which is more than you can say about our engine. Now we start to imagine what this project will mean. J-Rod went over the two available engines and chose his favorite which has only 2,300 hours on it and he compared our old engine with the new engine, using the best bits from both.

With incredible energy and resourcefulness we somehow exorcized the Evil Twin from Escape Velocity and even more remarkably installed the very smooth running “new” engine. Of course this level of spending has to stop and with both engines we can actually maneuver well enough to leave the dock and stanch the financial hemorrhage.

Bobbing at anchor again off Boat Works we accepted that several important projects like a haul out and bottom job will have to wait for South East Aisa. In the meantime I’m really going to enjoy having two reliable engines.

4 Comments

Filed under Uncategorized

4 Responses to Getting down and dirty in Coomera

  1. What was the brand of the washer? How did u get the old one out? Did you have to take the door frames off? Bill Irish Gift II

    • Our beloved Spendide was pretty much rusted out, so we paid a guy $50 AUD to bust it up and schlep it out. Took him about 45 minutes. The new washer is a Euromaid 5.5kg washer only (we never used the dryer part of the Spendide anyway) and it’s the same height and width as the Splendide but not as deep. We had to remove the doors but not the frames and it just squeezed through without a scratch. Unfortunately I don’t think there are any 120v options that will fit through the doorways without serious disassembly first. We had several options here in 240v world. This one cost $312US including shipping right to the dock. Go figure.

  2. It must be a good feeling to have two good engines at last. Carry on, guys. See the world.

  3. nrstrife

    Yikes! I heard about all this on the phone, but seeing the pictures, well, you know what a picture is worth. Yay for the washer! And yay for the engine!
    (Which I understand is under our berth?) Someday…. Miss you both. XO

We love to hear from you!